Aaronia HF-4080 V4 Handheld Spectrum Analyser (10Mhz – 8 GHz)

  • Frequency range: 10MHz to 8GHz
  • DANL: -145dBm(1Hz)
  • DANL with Preamp: -160dBm(1Hz)
  • Max. power at RF input: +10dBm
  • Lowest sample time: 10mS
  • Resolution (RBW): 1kHz to 50MHz
  • Units: dBm, dBµV, V/m, A/m, W/m²
    (dBµV/m, W/cm² etc. via PC software)
  • Detectors: RMS, Min/Max
  • Demodulator: AM, FM, PM
  • Input: 50 Ohm SMA RF-input (f)
  • Accuracy: +/- 2dB (typ.)
  • Interface: USB 2.0/1.1
  • Dimensions (L/W/D): 250x86x27 mm
  • Weight: 430gr
  • Warranty: 10 years

 

Highlights:

  • Very small size and low weight
  • Exposure limit calculation and display according to DIN/VDE 0848
  • Up to 100x faster sample time as V3 units
  • Up to 70dB higher sensitivity as V3 units
  • Low noise preamplifier (option)
  • 14Bit Dual-ADC
  • DDC Hardware-Filter
  • 150 MIPS DSP (CPU)
  • Data Logger (64K), expandable to 1MB (Option 001)
  • Enhanced and much sharper LCD display (compared to V3 units)
  • Simultaneously displays frequency and signal strength
  • Real-time remote control via USB
  • High resolution multifunction LCD 
  • Vector (I/Q) measurement
  • DECT & TimeSlot analyzer
  • Real-time Peak Power Detector (option)
  • Hold function
  • Very light EMC directional antenna HyperLOG 6080 included
  • Free MAC OS, Linux and Windows software

Initiates file download Datasheet (pdf)

Detail
  • Frequency range: 10MHz to 8GHz
  • DANL: -145dBm(1Hz)
  • DANL with Preamp: -160dBm(1Hz)
  • Max. power at RF input: +10dBm
  • Lowest sample time: 10mS
  • Resolution (RBW): 1kHz to 50MHz
  • Units: dBm, dBµV, V/m, A/m, W/m²
    (dBµV/m, W/cm² etc. via PC software)
  • Detectors: RMS, Min/Max
  • Demodulator: AM, FM, PM
  • Input: 50 Ohm SMA RF-input (f)
  • Accuracy: +/- 2dB (typ.)
  • Interface: USB 2.0/1.1
  • Dimensions (L/W/D): 250x86x27 mm
  • Weight: 430gr
  • Warranty: 10 years

 Highlights:

  • Very small size and low weight
  • Exposure limit calculation and display according to DIN/VDE 0848
  • Up to 100x faster sample time as V3 units
  • Up to 70dB higher sensitivity as V3 units
  • Low noise preamplifier (option)
  • 14Bit Dual-ADC
  • DDC Hardware-Filter
  • 150 MIPS DSP (CPU)
  • Data Logger (64K), expandable to 1MB (Option 001)
  • Enhanced and much sharper LCD display (compared to V3 units)
  • Simultaneously displays frequency and signal strength
  • Real-time remote control via USB
  • High resolution multifunction LCD 
  • Vector (I/Q) measurement
  • DECT & TimeSlot analyzer
  • Real-time Peak Power Detector (option)
  • Hold function
  • Very light EMC directional antenna HyperLOG 6080 included
  • Free MAC OS, Linux and Windows software
  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment