For full functionality of this site it is necessary to enable JavaScript.

Weller WR 3000M Desoldering Station Set

Weller WR 3000M Desoldering Station Set

 

This station is ESD safe.
Dimension L x B x H: 273 x 235 x 102 mm (10,75 x 9,2 x 4,02 inch)
Weight: approx. 6,7 kg
Channels: 3
Net supply: 230 V
Power supply: 360 W
Protection class: I
Fuse: T500 mA (230 V / 50/60 Hz)
Fuse overcurrent release: 2 A
Temperature control of channels: Soldering and desoldering tool, continuously
variable from 50°C - 550°C (150°F - 999°F)
  Temperature control range is tool independent
  Soldering iron WP 80 / WP 120: 50°C - 450°C (150°F - 850°F)
  Soldering iron WP 200 / WSP 150: 50°C - 550°C (150°F - 950°F)
  Soldering iron WMRT / WMRP: 100°C - 450°C (200°F - 850°F)
  Desoldering iron DSX 80 / DXV 80 / DSX 120: 50°C - 450°C (150°F  - 850°F)
  Hot air iron HAP 1 / HAP 200: 50°C - 550°C (150°F - 950°C)
Temperature accuracy: ± 9°C (± 17°F)
Temperature stability: ± 2°C (± 4°F)
Bleeder: Soldering tip (Tip to ground) conforms IPC-J-001
Bleeder voltage: Soldering tip (Tip to ground) conforms IPC-J-001
Pump: (periodic duty 30/30s)
Max. vacuum: 0,7 bar
Max. delivery rate: max. 18 l/min
Hot air: max. 15 l/min
Display: LCD
Temperature control: Buttons
Equipotentional bonding: Via 3.5 mm pawl socket at the back of device (hard grounded normal state)
USB interface: yes

WR3000M scope of delivery:

  • WR3M Repair Station
  • HAP200 Hot-air pencil with WDH30 Safety rest
  • DXV80 Desoldering iron with WDH40 Safety rest
  • WP80 Soldering iron with WDH10T Stop + go Safety rest
  • WVP Vacuum pick up
  • WDC2 Dry cleaner
  • Adapter for HAP200 Hot-air Pencil
  • CD with use software
  • USB cable
  • Nozzle replacement tool
  • 1.2mm and 3.0mm hot gas nozzles
  • Nozzle adapter for HAP200
  • 2.3mm and 2.5mm desoldering nozzles
  • Desoldering cleaning tools, brush, and spare filters
  • Color-coded clips for easy tool identification

 

Details

 

Weller WR 3000M Desoldering Station Set

 

This station is ESD safe.
Dimension L x B x H: 273 x 235 x 102 mm (10,75 x 9,2 x 4,02 inch)
Weight: approx. 6,7 kg
Channels: 3
Net supply: 230 V
Power supply: 360 W
Protection class: I
Fuse: T500 mA (230 V / 50/60 Hz)
Fuse overcurrent release: 2 A
Temperature control of channels: Soldering and desoldering tool, continuously
variable from 50°C - 550°C (150°F - 999°F)
  Temperature control range is tool independent
  Soldering iron WP 80 / WP 120: 50°C - 450°C (150°F - 850°F)
  Soldering iron WP 200 / WSP 150: 50°C - 550°C (150°F - 950°F)
  Soldering iron WMRT / WMRP: 100°C - 450°C (200°F - 850°F)
  Desoldering iron DSX 80 / DXV 80 / DSX 120: 50°C - 450°C (150°F  - 850°F)
  Hot air iron HAP 1 / HAP 200: 50°C - 550°C (150°F - 950°C)
Temperature accuracy: ± 9°C (± 17°F)
Temperature stability: ± 2°C (± 4°F)
Bleeder: Soldering tip (Tip to ground) conforms IPC-J-001
Bleeder voltage: Soldering tip (Tip to ground) conforms IPC-J-001
Pump: (periodic duty 30/30s)
Max. vacuum: 0,7 bar
Max. delivery rate: max. 18 l/min
Hot air: max. 15 l/min
Display: LCD
Temperature control: Buttons
Equipotentional bonding: Via 3.5 mm pawl socket at the back of device (hard grounded normal state)
USB interface: yes

WR3000M scope of delivery:

  • WR3M Repair Station
  • HAP200 Hot-air pencil with WDH30 Safety rest
  • DXV80 Desoldering iron with WDH40 Safety rest
  • WP80 Soldering iron with WDH10T Stop + go Safety rest
  • WVP Vacuum pick up
  • WDC2 Dry cleaner
  • Adapter for HAP200 Hot-air Pencil
  • CD with use software
  • USB cable
  • Nozzle replacement tool
  • 1.2mm and 3.0mm hot gas nozzles
  • Nozzle adapter for HAP200
  • 2.3mm and 2.5mm desoldering nozzles
  • Desoldering cleaning tools, brush, and spare filters
  • Color-coded clips for easy tool identification

 

 

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information