R&D Instrument 350 DTC Dry Block Temperature Calibrator (50~350°C, ±0.1°C)

Range: 50 to 350°C
Accuracy: ±0.7°C
Bath Stability: ±0.1°C
Stabilisation Time: 18 Min.
Heating Time: 50 to 350°C: 25~30 Min
Cooling Time: 350 to 100°C: 55~60 Min
BLOCK DIMENSION
Block Diameter: 25.4 mm
Block Depth: 190 mm
Insertion Tube Depth: 180 mm
PHYSICAL DIMENSION AND WEIGHT
Instrument Dimension (WxHxD in mm): 155x300x350
Instrument Weight in Kgs: 9
Resolution: 0.1°C
Units: °C / °F Switchable
Display: Graphical with LED Backlight
Power Supply: 230V AC ± 5% / 50Hz
Transmitter Supply: 24V DC (Loop Powered)
Temperature Setting: Digital Display through feather touch keypad
Display Stability: ±0.2°C
Radial Uniformity: ±0.3°C with similar probes
Switch Test: 5V DC nominal through LED Indication
Safety protection: Continuity check with OPEN / CLOSE indication
Measurement Specification
Parameter: mA; Range: 0 to 25; Resolution: 0.001 (mA); Accuracy: ±0.025% of Reading + 10µA
Parameter: V; Range: 0 to 10; Resolution: 0.001 (V); Accuracy: ±0.025% of Reading + 3mV
Parameter: RTD°C (Pt 100)2; Range: -200 to 850 ; Resolution: 0.1 ( C); Accuracy: ±0.025% of Reading + 0.3 C
Standard Delivery
1. Instrument : 1 no.
2. Power Cable : 1 no.
3. Carrying Case : 1 no.
4. Test Lead (2 wire):1 no.
5. Test Lead (3 wire):1 no.
6. Insertion Tube :
Dual Hole - 1 x 1/4" + 1 x 12.5 mm,
Dual Hole - 1 x 1/4" + 1 x 8.2 mm,
7. Insertion Tool : 1 no.
8. Spare Fuses : 6A - 2 nos.
9. User Manual : 1 no.
10. Traceable Calibration Certificate
Optional
- RS232 with RnD Cal-T
Software
- For TC & DTC Insertion Tube
of size: 1 x 1/4" + 1 x 10 mm,
2 x 1/4" + 2 x 5 mm.
- 110 VAC Power Supply
- Accredited (NABL) Calibration Certificate as per ISO/IEC 17025:2005 Standard