Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Cavity material: Aluminum alloy, corrosion-resistant and rigid structure
Vacuum level: ≤ -96 kPa (vacuum pump to be provided by buyer)
Head temperature: room temperature ~ 250°C, adjustable
Temperature control accuracy: ±1.5°C
Heat sealing pressure: 0–7 kg/cm², adjustable
Heat sealing time: 0–99 s, adjustable
Edge sealing width: 5 ± 0.4 mm (customizable)
Sealing length: 200 mm
Applicable battery size: 200 mm (length) × 120 mm (width)
Sealing thickness range: 60–300 μm
Sealing thickness accuracy: difference between any two points < 15 μm
Gas consumption: about 0.2 L compressed gas per cycle
Pneumatic working speed: ≥180 cycles/hour
Power: 300 W heating tube, total heating power consumption about 0.6 kW
Compressed air source: 0.5–0.7 MPa
Power supply: 220V / 50Hz
Dimensions (working part): L510 × W510 × H710 mm
Weight: about 70 kg
1. The head is made of copper material, which has good heat transfer effect, saves electricity consumption, improves work efficiency, and saves energy compared with similar products.
2. The pressure of the upper and lower heads can be adjusted by the pressure regulating valve to meet the requirements of different process parameters.
3. The upper and lower heads are driven by cylinders and guided by two linear guide sleeves, which can move up and down flexibly and accurately.
Ensure the parallelism requirements of the product after edge sealing.
4. With automatic puncture function.
5. The cover cavity is driven by an air cylinder and guided by a linear guide sleeve, which can move up and down flexibly, and the guidance is accurate to ensure the product tightness requirements.
6. It can be applied to batteries of different specifications, and the adjustment is simple and convenient.
7. Easy to operate, beautiful appearance, small size and light weight.
