AMETEK CTS Ripple NX400-1000-2.5-208 High Power Ripple Generator (400 A / 1000 VDC, 2.5 kVA; 3 x 208 V)

Fully integrated ripple generator, 400 A / 1000 VDC, 2.5 kVA amplifier, measurement and control unit, 3 x 208 V mains input

Ripple Source NX2.5

Frequency: DC; 10 Hz – 300 kHz

Power: 2.5 kVA

Output AC (source mode): single range; 80 Vp ± 5% / 65 Ap ± 5% (21 Vp @ 300 kHz)

Output DC (source mode): ± 80 Vp ± 5%; ± 28 A ± 5%

Mains supply: 50 - 60 Hz; 208: 3 x 208 V ± 10 % / 20 A (32 A CEE)

Dimensions: built into 19" rack on wheels, 860 x 552 x 1812 mm / 33.6 x 21.7 x 71.3"

Weight: approx. 250 kg

Heat dissipation: approx. 1.5 kW

RippleCoupler NX400-1000

Outputs: 1

EUT supply: 400 ADC / 1000 VDC

EUT connection: at output terminals

Ripple output (at EUT terminals):

10 Hz - 300 kHz

max. 40 Vp ± 5% (open, 2:1)

max. 250 Ap ± 5% (short, 4:1)

Transformer ratio: 2:1 and 4:1, switchable (automatic switching)

Capacitor bank: inlcuded 10mF, low ESR, automatic active pre-charge and discharge circuit, additional passive discharge circuit

Mains supply: Included in RippleSource NX rack

Environmental conditions:

5°C - 35°C, humidity 10% - 90% non-condensing, 86 kPa (860 mbar) to 106 kPa (1 060 mbar), altitude < 2000 m

Indoor use only, overvoltage category II, IP 20, pollution degree 2

Sound level: below 80 dBA

Footnotes: derated voltage and current performance < 300 Hz and > 50kHz

Datasheet