Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measurement components and ranges: 0-1000ppm O2 Arbitrarily scalable or configurable
Detection principle: Electrochemical gas sensor
System power supply: 220 VAC±10% 50/60Hz
System powerconsumption: Less than 50VA
Alarm: 1-way alarm output
Relay contact capacity: 24VDC,0.2A
Signal output: A group of 4-20 mA outputs correspond to O2 respectively.
Environmental temperature: 0-45℃; Environmental humidity:Less than 80% RH
Intake pressure: Use of suction pumps at negative and micro-positive pressures
Sample flow rate: 4-6L/min
Inlet and outlet interfaces: G1/4 Internal Thread Interface
Analyzer life: More than 5 years (normal use)
Installation mode: Base expansion screw fixation
Circuit structure: Applied in low explosion-proof or non-explosion-proof occasions
System warranty period: 12months
Calibration of analyzer: It is suggested that three or four standard gases and high purity nitrogen should be prepared for each calibration of zero and range points once a year.
System size: D*W*H=1200mm*650mm*1600mm
Housing dimensions: D*W*H=2000mm*2000mm*2500mm
Packing box: Wooden box packing
System weight: About 120 Kg
