Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Pressure Ranges: 4 MPa ~ 200 MPa
Instrumental Measurement Uncertainty Specification
Standard accuracy¹: ±(0.02% of reading or 0.001% of range, whichever is greater)
Optional (Improved Accuracy)²: ±(0.015% of reading or 0.00075% of range, whichever is greater)
¹ Correction factors are not necessary for the standard accuracy of 0.02% of reading when used within the following environmental limits:
Ambient temperature: 18°C to 28°C
Ambient pressure: 80 kPa to 105 kPa
Location: Local gravity adjusted weights
² Windows-based PressCal software is available to allow users to apply all necessary corrections for the specific piston range and accuracy.
Note: For more information on uncertainty, including the % reading threshold, refer to the technical note: “Guide for the Uncertainty Analysis in Pressure When Using P3000 Series Deadweight Testers”.
Materials of Construction
Standard weight materials: Series 3 non-magnetic austenitic stainless steel
Density: 7.8 g/cm³
Piston materials: Tungsten carbide with nickel binder
Cylinder material: Tungsten carbide with cobalt binder
Thermal coefficient of expansion: 11 ppm/°C
General Specifications
Test port adaptors: DH500. equivalent to HiP 60-xxxx high pressure fittings (60.000 psi) for 1/4” and 3/8” tube sizes
Weight: 23 lbs (10.5 kg)
Dimensions (W × D × H): 18” × 20” × 20” (457 mm × 508 mm × 508 mm)
Mass set weight: 100 lbs (45.5 kg)
Reservoir volume: 150 cc
Priming pump: Included with standard 3117, 3118 and 3119 models
Minimum weight increments: 2 bar, 0.2 MPa, 20 psi
Optional fine increment weights: Minimum increments of 0.2 bar, 0.02 MPa, 2 psi
Seal materials: Viton and Buna
Operating fluid: Sebacate, reference 3069551 (1 gallon standard)
