Genvolt P900/30 Laboratory Rack Power Supply (30kV, 30mA)

AC input voltage range: 220 - 240VAC

Input frequency: 50 - 60Hz

Input current: At full power and minimum input voltage

Nominal efficiency at full load: Better than 80%

Insulation: Encapsulated

Available output voltages: 30kV

Maximum output current: 30mA

Output power: 0 to 900W

Output polarity: Positive or negative with respective to ground. Please specify.

Line regulation: Not more than 100ppm of maximum rated output voltage for ± 10% input line change.

Load regulation: Not more than 100ppm of maximum rated output voltage for 10% to maximum output current change.

Voltage ripple: Better than 0.05% (peak to peak) of maximum output voltage

Temperature coefficient: Typically not more than 100ppm of maximum output per °C

Operating temperature: 0 to 35°C

Storage temperature: 0 to 60°C

Relative humidity: Operating at 30% to 80%. Do not store the unit at above 95% humidity.

Weight: Approx. 11kg

Dimensions: 482.6mmX88.1mmX478.2mm

Power input connector: Standard IEC connector

HV output connector:  LEMO circular push pull connectors with dust cap fitted

Control interface connector: 15 way D connector