Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
-Measurement range: 0.5% to 100% with 0.01% measurement value resolution
-Dynamic range: 200 (dark signal measurement 0.5% with -8° and a very low scattering mirror at the measurement port
-Typical Measurement uncertainty: ± 0.5% incl. the uncertainty of the calibration standards
-Repeatability: ± 0.1*[1-log10rg]%; rg = regular/hemispherical
-BN-R98-D2C-PP: ± 0.6% (k=2), diffuse reflection (ODM98)
-Integrating sphere: 500mm diameter with barium sulfate coating (ODP97)
-Measurement port: 50mm diameter with knife-edge
-Self absorption correction port: 50mm diameter with knife-edge. 90° position for the measurement port
-Sample holder: With pull springs. Shadowing of the measurement port from ambient light. Attachment of the calibration standard
-Detector port:
-8° port:25mm diameter. 8° alignment to the measurement port. Slide&Fix holder for fast exchange of port plugs (reflectance measurement) and light traps with 10mm aperture (scattered transmission measurement)
-Detector port: +8° port: 50mm diameter. 8° alignment to the measurement port
-Sensor: Photometric detector head with 1cm² light-sensitive surface
-f1' (spectral mismatch): f1’ uncertainty <6% (DIN 5052 T7 class B)
-Measurement signal: approx. 20.3nA with BN-R98-D2 reflection standard. 8° port with port plug
-Light Source: Radiation bundle with -8° direct alignment to the center of the measurement port and alignment of the reflection rays –8° port
-Temperature range: 2856K +/-20K (Standard illuminant A)
-Light Source: LH-100-UV, 100W/12V quartz halogen lamp
-Cooling: Cooling of the lamp holder through active air circulation using a fan
-Connector: Laboratory cables with banana plugs
-Light Guide: Approximate 18mm diameter on the sample and approx. 9mm on the –8° port
-Warm-up time: Approximate 10min
-Design:
Similar to the X1-RM optometer. ISM-50-R-V01 Firmware.
Calibration, substitution correction, measurement of the transmission degree, measurement of the scattered light proportion, calculation of the directed light proportion, display in %
Remote control of the lamp power supply unit
-Display:
LCD graphic display 97x32 pixel
Active size 14.3mm x 35.8mm
LED backlight can be switched on/off
Text display 4 rows, 14 characters per row
-Operation buttons on the front control panel: Three
-Temperature range:
Operation: 5 to 40°C
Storage: -10 to 50° C
-Lamp power supply: Similar design to the LPS-100-RM.
-Output power: 100W / 0 - 10A / max. 13.5V
-Resolution: 0.2mA
-Temperature range: +-0.3mA/°K
-Stability: +-1mA over 8 hours, 60 min after switch on in a constant environment
-Interface: RS232 / RS485: 19200 Bd, 8D, 1S, N
-Temperature range:
Operation: 10 - 30°C (with free air circulation)
Storage: 5 - 50°C
-Power Supply: 120 to 230 VAC, 50 to 60Hz
-Dimensions: 3/4 19” broad bench-top housing similar to the BTH-19-3-4