GW INSTEK GDS-2102 Digital Oscilloscopes (100Mhz, 2Ch, 1Gsa/S)
Manufacturer: GW INSTEK Model: GDS-2102 - Request a Quotation
- Contact
GDS-
2062/2064
|
GDS-
2102/2104
|
GDS-
2202/2204
|
|
VERTICAL | |||
Channels |
2 / 4
|
2 / 4
|
2 / 4
|
Bandwidth |
DC
~ 60MHz (-3dB)
|
DC
~ 100MHz (-3dB)
|
DC
~ 200MHz (-3dB)
|
Rise Time |
5.8ns Approx.
|
3.5ns Approx.
|
1.75ns Approx.
|
Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) | ||
Accuracy | ±(3% x |Readout|+0.05 div x Volts/div+0.8mV) | ||
Input Coupling | AC, DC & Ground | ||
Input Impedance | 1MΩ±2%, ~16pF | ||
Polarity | Normal & Invert | ||
Maximum Input | 300V (DC+AC peak), CATII | ||
Waveform Signal Process | + , - , FFT | ||
Offset Range |
2mV/div ~ 20mV/div : ±0.5V 50mV/div ~ 200mV/div : ±5V 500mV/div ~ 2V/div : ±50V 5V/div : ±300V |
||
Bandwidth Limit | 20MHz (-3dB) | ||
TRIGGER | |||
Sources | CH1 , CH2 , CH3 , CH4 , Line | ||
Modes | Auto-Level, Auto, Normal, Single, TV, Edge, Pulse Width | ||
Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | ||
Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~ 200MHz : Approx. 1div or 10mV |
||
HORIZONTAL | |||
Range | 1ns/div ~ 10s/div (1-2-5 increments) ROLL : 250ms/div ~ 10s/div |
||
Modes | Main, Window, Window Zoom, Roll, Scan, X-Y | ||
Accuracy | ±0.01% | ||
Pre-Trigger | 20 div maximum | ||
Post-Trigger | 1000 div | ||
X-Y MODE | |||
X-Axis Input | Channel 1 | ||
Y-Axis Input | Channel 2 | ||
Phase Shift | ±3° at 100kHz | ||
SIGNAL ACQUISITION | |||
Real-Time Sample Rate | 1GSa/s maximum | ||
Equivalent Sample Rate | 25GSa/s maximum | ||
Vertical Resolution | 8 Bits | ||
Record Length | 25K Points maximum | ||
Acquisition Mode | Normal, Peak Detect, Average | ||
Peak Detection | 10ns | ||
Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 | ||
CURSORS AND MEASUREMENT | |||
Voltage Measurement | Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot | ||
Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle | ||
Delay Measurement | Eight types of delay measurement | ||
Cursors Measurement | Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) | ||
Auto Counter |
Resolution : 6 digits |
||
CONTROL PANEL FUNCTION | |||
Autoset | Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level | ||
Save Setup | Up to 20 sets of measurement conditions | ||
Save Waveform | 24 sets of waveform | ||
DISPLAY | |||
TFT LCD Type | 5.6 inch | ||
Display Resolution | 234 (Vertically) x 320 (Horizontally) Dots | ||
Display Graticule | 8 x 10 divisions ; 8 x 12 divisions (menu off) | ||
Display Brightness | Adjustable | ||
INTERFACE | |||
Go/NoGo Output | 5V Maximum/10mA TTL Open Collector Output | ||
RS-232 Interface | DB 9-pin male DTE RS-232 interface | ||
GPIB Interface (Option) | Fully programmable with IEEE 488.2 compliance | ||
USB | USB Host/Device 2.0 full speed supported | ||
POWER SOURCE | |||
Line Voltage Range | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection | ||
Battery Power(Option) |
Battery : 10.8V Li-Ion battery pack Charge Time : 8 hours (Power ON) Operating Time : 3 hours , depending on operating condition |
||
MISCELLANEOUS | |||
Multi-Language Menu | Available | ||
Online Help | Available | ||
Time Clock | Time and Date, Provide the Date/Time for saved data | ||
DIMENSIONS & WEIGHT | |||
310(W) x 142(H) x 254(D) mm; Approx. 4.3kg |
Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
Discontinued
- Quality Engagement
- Easy change and return
- Delivery Avaliable
- Favorable payment