Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

Volume: 384 litres
Interior dimension: 640W x 1200H x 500D mm
Exterior dimension: 824W x 1720H x 655D mm
Stainless steel grids: 2
Max. number of internals: 14
Setting temperature range without light, with humidity: +5 to +70°C
Setting temperature range with light, with humidity: +5 to +70°C
Setting temperature range with light, without humidity: 0 to +70°C
Setting temperature range without light, without humidity: 0 to +70°C
Working temperature range with light, without or with humidity: 15 to +40°C
Working temperature range without light, with humidity: +5 (at least 20 below ambient temperature) to +70°C
Working temperature range without light, without humidity: 0 (at least 20 below ambient temperature) to +70°C
Setting accuracy temperature: 0.1°C
Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Setting range humidity: 10-90% RH
Humidity supply with distilled water from external tank by self-priming pump
Humidification by hot steam generator
Dehumidification by cold trap using the Peltier technology
Setting accuracy humidity: 0.5% RH
ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
Adjustable parameters: temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones, summertime/wintertime
Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function HeatBALANCE: adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
Function SetpointWAIT: the process time does not start until the set temperature is reached
Calibration: three freely selectable values each, temperature and humidity
Interface: Ethernet LAN, USB
Programme stored in case of power failure
Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Temperature control: over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY: additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Integral fault diagnostics for temperature and humidity control
Alarm: visual and accoustic
Energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)
Door fully insulated stainless steel door with 2-point locking (compression door lock)
Voltage: 230V, 50/60Hz
Electrical load: approx.700W
Ambient temperature: 16°C to 40°C
Humidity: max. 70 %, non-condensing