Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Volume: 256L
Interior dimensions: Width 640 x Height 800 x Depth 500 mm
Exterior dimensions: Width 824 x Height 1183 x Depth 684 mm
Number of supply trays: 2
Maximum number of tray grooves: 9
Operating temperature range: Minimum 50°C above ambient temperature up to 800°C
Setpoint resolution: 0.10°C
Temperature sensors: Uses 2 Pt100 temperature probes according to DIN Class A standard, used for displaying operating temperature and alarm
Control panel (ControlCOCKPIT): Dual display. Multifunctional PID microprocessor controller with two high-resolution color TFT screens
Language settings on ControlCOCKPIT panel: German, English, French, Spanish, Polish, Czech, Hungarian
Adjustable countdown timer: From 1 minute to 99 days
HeatBALANCE function: Used to adjust the heating level to balance the top and bottom of the drying chamber within an adjustable range of -50% to 50%
SetpointWAIT function: Time is activated when the temperature reaches the set temperature
Calibration: Freely selectable for 3 temperature values
Adjustable parameters: Temperature (0°C or 0°F), air convection door position, time program, time zone
Sterilization: Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber, no sterilization for samples
Natural air convection
Pre-heated air mixture adjustment: By adjusting the air intake cover by 10%
Program storage in case of power failure
Programs: AtmoCONTROL software on USB memory stick used for programming, managing, and transferring programs via Ethernet or USB interface
ControlCOCKPIT control panel: USB port for loading programs, reading values, activating user index setup functions
Data display: Display of saved data on the ControlCOCKPIT control panel (up to 10,000 values equivalent to about 1 week)
Ethernet interface: Located at the back of the device for reading recorded data, loading programs, and online recording
Temperature control: Mechanical temperature limit device TB, protection class 1 according to DIN 12 880, automatically shuts off when the temperature exceeds approximately 20°C above the set temperature, overheat control TWW, protection class 3.1, or adjustable temperature limit TWB, protection class 2, selectable on the screen.
Additional temperature control: Integrated over and under temperature control "AFS," automatically following the setpoint value within a predefined tolerance range; alarm in case of over and under temperature, heating function is cut off in case of over-temperature, cooling function automatically cuts off in case of under temperature
Microprocessor-controlled PID with self-diagnosis system
Alarm: Visual and audible
Door: Fully insulated stainless steel door with 2 locking points, inner glass door
Housing structure: Scratch-resistant, hard, and durable stainless steel, galvanized steel at the back.
Internal memory: Capable of storing data for at least 10 years
100% air safety compliance (100% AtmoSAFE)
Connections: Ethernet LAN, USB
Power supply: 230 V, 50/60 Hz
Power consumption: Approximately 1700 W
Ambient temperature: 5 – 40°C
Humidity: Maximum 80% rh, non-condensing
Included Accessories:
Calibration certificate at 370°C (provided by Memmert)
Stainless steel mesh trays, 2 pieces
USB with AtmoCONTROL software
User manual
