Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measuring range:
Traverse length: 17.5 mm
Detector
Range: 360 µm (-200 µm to +160 µm)
Range/resolution: AUTO/depending on the measurement range, 360 µm/3.5 nm, 100 µm/0.9 nm, 25 µm/0.2 nm
Tracing speed: During measurement: 0.25 mm/s, 0.5 mm/s, 0.75 mm/s, 1 mm/s, During return: 1mm/s
Measuring force: 4mN
Stylus tip:
Radius: 5 µm
Angle: 90'
Skid force: Less than 400 mN
Assessed profiles: Primary profile (P), Roughness profile (R), DF profile, R-Motif
Power supply
AC adapter (USB type with interchangeable AC pin adapters), Input voltage: 100 VAC to 240 VAC ±10% (50 Hz/60 Hz)
Output rating: 5.0 VDC/2.0 A, Internal battery (Ni-MH), USB standard supported: USB 2.0 (Full speed), USB charging standard: BC1.2
The following USB ports are supported: SDP "SDP (Standard Downstream Port)", CDP "CDP (Charging Downstream Port)", DCP "DCP (Dedicated Charging Port)"
Charging time: Up to 4 hours (operable during charging)
Built-in battery:
The charging time above is applied when the supplied AC adapter is used. When the battery is charged via a USB connection with a PC, etc., charging may take more than 4 hours to complete..
Number of measurable times: Approx. 1,000 times (depending on the measurement conditions with full charge) Charging temperature: 5°C to 40°C if the ambient temperature is too high, the battery may not charge sufficiently.
Size (WxDxH)
Display unit: 164.7×67.1x51.9 mm
Drive unit: 115x23x26 mm
Mass: 330 g (Display unit), 180 g (Drive unit), 7.8 g (Detector)
