OMEGA MMDWU001V10P3D0T1A1 Highly Configurable, High Accuracy, Custom Pressure Transducers (Differential, 1 psi, NPT Female, 1/4 in)

Shock: 50 g, 11 ms half sine, vertical and horizontal axis

Weight: 200 g

Accuracy: ± 0.08 %

Bandwidth: DC to 1 kHz

Stability: ± 0.1%

Vibration: 5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis

Cable Length: 2 m

Output Signal: Voltage

Pressure Type: Differential

Pressure, Max: 1 psi

Pressure, Min: 0 psi

Response Time: <1 ms

ADC Resolution: None

Burst Pressure: 1000 psi Maximum

Proof Pressure: 6x Full Scale up to 1000 psi

Stability Note: Long Term Stability (1-Year): ± 0.1% FS typical.

Supply Voltage: 15 to 30 Vdc

Pressure Cycles: 1 million, minimum

Electrical Output: 0 to 10 V

Enclosure Ratings: IP67

Materials, Wetted: 316L Stainless Steel

Supply Power Note: 15 to 30 Vdc @ 10 mA

Media Compatibility: Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids

Proof Pressure Note: Positive Side

Line/Static Pressure: 500 psi max applied to both sides simultaneously

Electrical Connection: Cable

Insulation Resistance: 100 MΩ @ 50 Vdc

Process Connection Size: 1/4 in

Process Connection Type: NPT Female

Operating Temperature, Max: 121 °C

Operating Temperature, Min: -45 °C

Compensated Temperature, Max: 60 °C

Compensated Temperature, Min: 4 °C

Thermal Effect on Zero error, Max: ± 1% FS

Positive Side differential wetted materials: 316L stainless steel

Negative Side differentional compatable fluids or gasses: Same as positive side

Datasheet