Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measuring range:
Fe: 0 to 5000 μm / 0 ... 196.9 mils (depending on sensor)
NFe: 0 to 3000 μm / 0 ... 118.1 mils (depending on sensor)
Accuracy: ± (2% of reading + 1 μm / 0.039 mils)
Resolution:
0.1 μm (0.0039 mils) (< 100 μm / 3.94 mils)
1 μm / 0.039 mils (> 100 μm / 3.94 mils)
Measurable materials:
Non-magnetic layers on steel, iron, ...
Non-electrically conductive layers on aluminum, copper, ...
Min. radius of curvature convex: 5 mm / 0.2 in
Min. radius of curvature concave: 25 mm / 1 in
Min. measuring surface: Ø17 mm / 0.7 in
Min. substrate thickness:
0.2 mm / 0.08 in (on magnetic materials)
0.05 mm / 0.002 in (on non-magnetic materials)
Probe mode:
Autom. Mode with material detection (Fe + NFe)
Magnetic mode (Fe)
Eddy current mode (NFe)
Measurement mode:
Single measurement
Continuous measurement
Calibration:
Multipoint calibration (1 ... 4 points for each group)
Zeroing
Units: μm, mm, mils
Data transfer: USB 2.0
Storage:
A volatile measuring group (DIR mode)
Four measuring groups with autom. Storage and max. 2000 readings (GEN mode)
Statistical functions: Number of Measured values, mean, minimum, maximum, standard deviation
Alarm: Display when the adjustable upper and lower alarm limits are exceeded
Operating time: Autom. Shutdown mode (3 min.)
Power supply: 3 x 1.5V AAA batteries
Display: 128 x 128 px LCD display
Indicators:
Battery status
Fault detection
Operating conditions:
0 ... 50°C / 32 ... 122°F
20 ... 90% RH not condensing
Storage conditions:
-10 ... 60°C / 14 ... 140°F
20 ... 90% RH not condensing
Dimensions: (L x W x H) 143 x 71 x 37 mm / 5.6 x 2.8 x 1.5 in
Weight: With sensor and batteries: approx. 271 g / < 1 lb
Delivery Scope
1 x PCE-CT 80 Coating thickness gauge
1 x PCE-CT 80-FN1.5 sensor
3 x AAA batteries
1 x User manual
1 x Transport case
1 x Set of standard films
1 x Calibration plates (Fe and NFe)
1 x ISO calibration certificate
