Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Sensor Body Dimensions: 86 mm D x 135 mm H (3.4 in x 5.3 in)
Rear thread 1” BSP/NPT
Weight: 1.4 kg (3.1 lb)
Measurement range: 500 mm to 15 m (19.7 in to 49.2 ft)
Frequency: 41kHz
Beam Angle: <8°
Effective Beam Angle (using DATEM): 3°
Accuracy: 5 mm (0.2 in) up to 10 m (32.8 ft) range/ 10 mm (0.4 in) over 10 m range (32.8 ft)
Resolution: 5 mm (0.2 in)
Housing Material: Valox 357 PBT (Polybutylene terephthalate)
Temperature
Compensation: Automatic, internal temperature sensor, ± 0.5 °C/°F
Transducer Cable
Requirements: Twin screened. Integral cable length 5 m, 10 m, 20 m or 30 m (16.4 ft, 32.8 ft, 65.6 ft, 98.4 ft)
Operating Temperature
Range: 40 °C to +80 °C (-40 °F to +176 °F) process temperature
Ingress Protection: IP68 to BS EN 60068-2-17:1995 and BS EN 60529 (Nema 6P available)
Approvals: See EC Declaration of Conformity in the manual
Hazardous Area Approval: ATEX; Ex ia Zone 0 and FISCO
Power: Bus-powered, per IEC 61158-2; 20mA (general purpose or I.S. version) 20mA 18-24 V DC
Update Time: 1 to 2 seconds at 20mA current loop
Programming: PA modem; Simatic PDM, EDDL, FDT/DTM on request. PC interface 2-wire loop powered from PC or laptop. No
external power is required.
Outputs: Profile 3.0.2, Class A with I&M functionality
