Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Full scale value can be programmed (teaching possible)
Sensor: analog Hall sensor
Nominal width: DN 32 / 40 / 50
Process connection: female thread G 1 1/4..G 2 (further process connections available on request)
Metering range: 50....300 l/min for details see table "Ranges"
Pressure loss: ~ 1 bar at Qmax
Qmax.: up to 300 l/min
Measurement accuracy: 8% of full scale value
Pressure resistance: PS 200 bar
Medium temperature: -20..+85 °C, optionally -20..+120 °C
Ambient temperature: -20..+70 °C
Media: water
Wiring: see section "Wiring"
Materials medium-contact
Brass construction: CW614N nickelled, CW614N, 1.4305, 1.4310, hard ferrite,
Stainless steel construction: 1.4571, 1.4310, hard ferrite
Materials, non medium-contact: CW614N nickelled
Supply voltage: 18..30 V DC
Power consumption: < 1 W
Output: Voltage output 0..10 V (alternatively 2..10 V)
Load min. 1 kOhm
Display: yellow LED (On = Normal / Off = Alarm / rapid flashing = Programming
Electrical connection: for round plug connector M12x1, 4-pole
Ingress protection: IP 67
Weight: see table "Dimensions and weights"
Conformity: CE
Installation location
Standard: horizontal inwards flow; other installation positions are possible; the installation position affects the display, metering and switching range.
