Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
SSensor: analog Hall sensors
Nominal width: DN 32 / 40 / 50
Process connection: female thread G 1 1/4..G 2(further process connections available on request)
Metering range: 10..160 l/min For details see table "Ranges"
Pressure loss: ~ 4..7 bar at Qmax
Qmax.: up to 160 l/min
Tolerance: ±10 % of full scale value at constant viscosity
Viscosity stability: mean deviation ±7 %, max. 18 % (30-330 mm²/s) of full scale value
Pressure resistance: PS 200 bar
Medium temperature: -20..+85 °C, optionally -20..+120 °C
Ambient temperature: -20..+70 °C
Media oil: Wiring see section "Wiring"
Materials medium-contact
Brass construction:
CW614N nickelled, CW614N, 1.4305, 1.4310, hard ferrite
Stainless steel construction: 1.4571, 1.4310, hard ferrite
Supply: voltage 18..30 V DC
Power consumption: < 1 W
Outputs:
Frequency output
Transistor output "Push-Pull" (resistant to short circuits, and reversed polarity protected) lout = 100 mA max.
Selectable frequency, max. 2 kHz
Ingress protection: IP 67
Electrical connection for round plug connector M12x1, 4-pole
Weight: see table "Dimensions and weights"
Conformity: CE
Installation location
Standard: horizontal inwards flow; other installation positions are possible; the installation position affects the metering and switching range.
