Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Number of shaking platforms: One-tier
Shaking motion/Shaking width/Door type: Switchable Reciprocal/Orbital shaking, 10 to 50 mm (stepless), Double swing door
Temperature range (*1): +4℃ to +60℃
Temp. control accuracy (*2): ±0.3℃ to ±1.0℃
Speed range (*3): 30 to 250 r/min
Platform size/Capacity: 800 × 600 mm (Max. inside height: 601 mm), Erlenmeyer flask 500 mL × 32.5 L × 6
Maximum load: Approx. 17 kg (Platform not included)
Ambient temp. range (*1): +5℃ to +35℃
Heating/Cooling method: Heater 800 W/Compressor 125 W
Program functions: Number of stored programs: 4 programs, number of steps: 9 steps (per program) Setting contents (*4): Temperature, shaking speed, and time (per step) with weight function (time setting range: 00 h 00 min to 99 h 59 min)
Safety devices/functions: Leakage breaker 15 mA (15 A for overcurrent protection), High temperature safety device, High temperature cut circuit for compressor, Motor current limiter, Motor overload protection, Over-voltage protection, Fuse, Filter check function, Shaking stop function upon abnormal vibration detection, Self-diagnosis function for temperature sensor error, Nonvolatile memory error, Alarm of abnormal sample temp. (Set as desired),Detecting the door opening and closing, Breaking device when motor runaway
Other functions (*5): Eco-Drive function, Automatic lighting of the chamber light, Communication holes in the chamber (2 holes), Automatic drying of condensation water (*6)
Dimensions (W × D × H): 1327 × 835 × 1256 mm (with top board installed)
Weight: Approx. 328 kg
Power supply: AC100V/AC220-240V/12A built-in down transformer
Standard accessories: Universal shaking platform MT-8060A ×1 pc, Vibration absorbing pad× 4pcs, Spacer × 4 pcs
(*1)If the product is to be used at a temperature setting of +10.0℃ or lower, the ambient temperature should be +30℃ or lower. The specifications of this product are the performance values based on themeasurement method specified by our company.
(*2)Temperature change immediately after the defrosting function is activated is not included.
(*3)Shaking speed for both reciprocal/orbital.
(*4)The weight function is a function that allows shaking to begin after the inside of the chamber reaches a set temperature. This product does not have a temperature gradient (tilt) function.
(*5)Transmission output signal (analog signal) 1 to 5 V and alarm output signal (DCV) are also available by special order.
(*6)Depending on usage conditions, automatic drying may not be able to keep up and manual drainage may be required.
