Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Detector
Detector Type: InGaAs/PIN
Optical Inputs: FC/APC
Internal Coupling Fiber: SMF-28e+
Coupling Loss: <0.5 dB (<0.3 dB Typ.)
Operating Wavelength: Optimized for 1300 nm (1200 - 1700 nm Range)
Responsivity (Typical): 0.85 A/W @ 1300 nm
Active Detector Diameter: 0.075 mm
Optical Back Reflection: <-40 dB
Photodiode Damage Threshol(d): 10 mW
RF OUTPUT
RF OUTPUT Bandwidth (3 dB): DC - 400 MHz AC Coupled (-AC Suffix): 100 Hz - 400 MHz
Common Mode Rejection Ratio: >25 dB (Typ. >30 dB)
RF OUTPUT Transimpedance Gain: 10 x 10^3 V/A(b)
RF OUTPUT Conversion Gain: 9 x 10^3 V/W @ 1300 nm(b)
RF OUTPUT Power at 1 dB Compression(c): -
RF OUTPUT CW Saturation Power: 420 µW @ 1300 nm
RF OUTPUT Coupling: DC or AC
RF OUTPUT Impedance: 50 Ω
Max Voltage Swing: ±1.9 V for 50 Ω Load ±3.8 V for High-Impedance Load
Minimum NEP(d): 8 pW/Hz^1/2 (DC to 100 MHz)
Overall Output Voltage Noise: <2.0 mVRMS
MONITOR Outputs
MONITOR Output Impedance: 200 Ω
MONITOR Output Bandwidth (3 dB): DC - 3 MHz
MONITOR Output Conversion Gain, High Z Load(b): 9 V/mW @ 1300 nm
MONITOR Output Voltage Swing, High Z Load: 10 V Max
Overall Output Voltage Noise: <0.65 mVRMS
DC Offset: < ±2 mV
General
Electrical Outputs: SMA
Included DC Power Supplye: ±12 V @ 250 mA (100/120/230 VAC, 50 - 60 Hz, Switchable)
Operating Temperature Range(f): 0°C to 40°C
Storage Temperature Range: -40 °C to 70°C
Dimensions (W x H x D): 85 mm x 80 mm x 30 mm (3.35" x 3.15" x 1.18")
Weight: 0.35 kg
(a) All technical data are valid at 23 ± 5°C and 45 ± 15% relative humidity (non-condensing).
(b) Values for transimpedance and conversion gain are lossless gain values [i.e. losses introduced by the FC/APC connectors (typically 0.15 to 0.35 dB) are not considered].
(c) For a 50 Ω load.
(d) For more information on NEP, please see Thorlabs' Noise Equivalent Power White Paper.
(e) A replacement power supply is available below.
(f) Non-Condensing.
