Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

Output Voltage Range: 0 to ±20 kV DC or peak AC
Output Current Range: 0 to ±20 mA DC or ±60 mA peak for 1 ms
Input Voltage Range: 0 to ±10 V DC or peak AC
Input Impedance: 25 kW, nominal
DC Voltage Gain: 2000 V/V
DC Voltage Gain Accuracy: Better than 0.1% of full scale
DC Offset Voltage: Better than ±2 V
Output Noise: Less than 1.5 V rms*
Slew Rate (10% to 90%, typical): Greater than 800 V/µs
Large Signal Bandwidth (1% distortion): DC to greater than 5.2 kHz (The unit will trip when maximum is reached)
Small Signal Bandwidth (-3dB): DC to greater than 20 kHz
Stability:
Drift with Time Less than 50 ppm/hr, noncumulative
Drift with Temp Less than 100 ppm/°C
- Voltage Monitor:
Ratio: 1/2000th of the high-voltage output
DC Accuracy: Better than 0.1% of full scale
DC Offset Voltage: Less than ±2 mV
Output Noise: Less than 10 mV rms*
Output Impedance: 47 W
- Current Monitor:
Ratio: 1 V/6 mA
DC Accuracy: Better than 1% of full scale
Offset Voltage: Better than ±10 mV
Output Noise: Less than 30 mV rms*
Bandwidth (-3dB): DC to greater than 20 kHz
Output Impedance: 47 W
- Mechanical:
Dimensions: 279 mm H x 482 mm W 654 mm D (11” H x 19” W x 25.75” D)
Weight: 24.9 kg (55 lb)
HV Connector: Caton High Voltage Connector
BNC Connectors: Amplifier Input, Voltage Monitor, Current Monitor, Remote High Voltage ON/OFF, Out of Regulation Status, Fault/Trip Status
- Operating Conditions:
Temperature: 0°C to 40°C (32°F to 104°F)
Relative Humidity: To 85%, noncondensing
Altitude: To 2000 meters (6561.68 ft.)
- Electrical:
Line Voltage: Factory Set for one of two ranges: 104 to 127 V AC or 180 to 250 V AC, either at 48 to 63 Hz
AC Line Receptacle: Standard IEC 320 three-prong AC line connector
Power Consumption: 1000 VA, maximum
- Supplied Accessories:
Operators’ Manual: PN: 23461
HV Output Cable: PN: 43466
Line Cord, Spare Fuses: PN: N5011. Selected per geographic destination

