Wayne Kerr 6500/6565 DC Bias Test System (up to 40A)

Output Current: 0 to 10A

Resolution: From 1mA to 1A in 999 steps of 1mA

                   From 1.01A to 10A in 899 steps of 10mA

Dc Bias current accuracy: ±1% of set bias current ± 1mA from 1mA to 1A

                                          ±1% of set bias current ± 10mA from 1.01A to 10A

Accuracy of current drive read back: ±1% of set bias current, ±1 digit

Compliance voltage: 9V max at 1V ac drive level*

                                 10V max at 0.25V ac drive level*

Max signal drive level: 1V ac rms 20Hz – 49.9MHz*

                                     0.5V rms 50MHz – 120MHz*

Frequency range: 20Hz – 120MHz

Input Specification: Over-voltage trip, safety interlock, fan failure, excess temperature and circuit diagnostic checks

Suitable high current fixtures: 1J1026(20A), 1J1027(40A)

Storage: -40°C to 70°C

Operating: 0°C to 40°C

Full accuracy: 15°C to 30°C

Measurement terminals: 2-terminals measurement via M8 studs

                                        4-terminal measurement via Kelvin leads and M8 studs

Input supply voltage: 85-265V ac rms 47-63Hz via IEC connector

Typical input current: 4.2A @ 100-120V, 2.1A @ 220 – 230V

Cooling: by 3 internal fans

Case Size: (3U) 435mm x 132mm x 522m (W x H x D)

Weight: 15kg