Maximizing Battery Life of IoT Devices By Minimizing Load Current Draw

The Challenge of Measuring Low IoT Currents To maximize battery life, your product current draw must be kept to an absolute minimum. This requires that you use low power components and efficient techniques to de-energize components when they are not in use. You need sensitive measurement instrumentation to measure current levels as low as nA.

Maximizing Battery Life of IoT Devices

By Minimizing Load Current Draw

The Challenge of Measuring Low IoT Currents

To maximize battery life, your product current draw must be kept to an absolute minimum. This requires that you use low power components and efficient techniques to de-energize components when they are not in use. You need sensitive measurement instrumentation to measure current levels as low as nA.

Determine the load current profile

It can be difficult to characterize the load current profile of a prototype IoT device, because you must measure the current in a wide range of operating states:

sleep mode (from nA to µA),
standby modes (from hundreds of microamps to tens of milliamps), and
active states (from milliamps to amps), including short current bursts due to wireless transmissions

To accurately capture these widely varying load current levels, you need an exceptional measurement solution that includes:

A wide current measurement range, from hundreds of nanoamps to amps
The measurement speed to capture current pulses just a few microseconds wide
A large memory buffer to store the prototype device’s current profile

Keithley’s DMM7510 7½-digit Graphical Sampling Multimeter is well-equipped to meet these demands, as it offers:

pA current sensitivity
1 Msample/s sampling
27 M data points of memory

Watch now to learn how to solve the IoT measurement challenges.

Determine the Average Current of an IoT Device

Measuring Ultra-Low Power in Wireless Sensor Nodes

Simulate any battery type

How low can the battery voltage drop before your IoT device turns off? Gauging battery performance at different stages of battery discharge is difficult, as it requires instrumentation that can accurately simulate battery performance.

To address this, Keithley’s 2281S-20-6 Battery Simulator makes it easy to model any type of battery. It allows you to efficiently test prototype IoT devices in any battery state, with high repeatability to effectively estimate battery life. Combining a 2281S-20-6 Battery Simulator with a DMM7510 Graphical Sampling Multimeter will give you a complete solution for assessing power consumption and battery life of your IoT prototypes.

Program the battery simulator for any state of charge, such as near the completely discharged state, to determine how a product performs under a low battery condition and to determine the low battery shut-off voltage.

Model any type of battery

Create any battery model.

The final piece of the puzzle is to create a model for the battery that powers your IoT device. Keithley’s 2450 or 2460 Graphical SourceMeter® Source Measure Unit (SMU) instruments make it easy to create the model for the battery used by your product.

A battery model-generating script operates the SMU instrument as a controlled current load and derives the model parameters.

Related News

07/15/2026 14:45:07

Which Vacuum Pump Should You Choose for a Microbiology Lab to Avoid Affecting Samples?

Vacuum pumps are utilized in a wide range of microbiology laboratory procedures, from membrane filtration and the aspiration of supernatants following centrifugation to sample concentration and the support of negative-pressure systems. Selecting the appropriate pump not only ensures more stable operational processes but also minimizes the risk of sample contamination, reduces maintenance costs, and extends the equipment's lifespan

07/15/2026 09:15:04

QCVN 25:2025/BKHCN Takes Effect: Do Businesses Need to Prepare Electrical Safety Testing Equipment?

Electrical safety is consistently one of the primary criteria evaluated before electrical or electronic equipment—or industrial components—are released to the market. A product may operate reliably yet still fail to meet requirements if its insulation lacks sufficient durability, its grounding resistance exceeds permissible limits, or leakage current occurs during operation.

07/14/2026 09:05:30

Why Is Associated Research Considered an Icon of Hipot Technology?

When it comes to electrical safety testing equipment specifically Hipot testers—many QA/QC and testing engineers are familiar with the globally renowned brand Associated Research. A subsidiary of the parent company IKONIX, Associated Research (ARI) invented the world's first commercial Hipot tester.

07/13/2026 15:09:18

What Is the Standard 3-Phase Voltage? How to Read Cabinet-Mounted Meters Without Errors

Voltmeters are almost invariably found on the panels of electrical cabinets in factories, power stations, or generator systems. A glance lasting just a few seconds allows an operator to determine whether the power supply is stable or showing signs of abnormality. However, not everyone understands the significance of the displayed readings, particularly regarding three-phase electrical systems.

07/13/2026 09:48:30

Distinguishing between ARI’s Hypot, HypotUltra, and HypotMax: Which device is right for your factory?

Few people realize that the concept of the "Hipot Test"—or electrical safety testing—has long existed within the electrical equipment manufacturing industry. Driven by the growing need to verify the voltage withstand capabilities of conductors, motors, and electrical devices, the industry required a robust and virtually fail-safe method to detect insulation weaknesses before products reached the market.