AMETEK CTS VDS 200Q10.1-120 4-Quadrant Amplifier (-60 ... +60 Vpk, 0 ... 10 A, 180 kHz, 120 VAC)

Output voltage (cont.): -60 ... +60 VDC

Output current (cont.): 0 ... 10A

Bandwith (-3dB): DC ... 180kHz, full signal

Slew rate typical: < 10us (STD mode) / < 3us (HF mode)

Source impedance: < 10 mΩ

Compensation Modes: CAP: DC ... 3kHz / STD: DC ... 40 kHz / HF: DC ... 150 kHz

Recovery time: 90 % of max. excursion within 25 µs

Sense Lines: Yes, voltage drop compensation in cabling, max 8 VDC (AC up to to approx. 8 kHz)

Ripple voltage ( noise): < 10 mVpp up to min. 400 Hz

Safety: Circuit breaker

Interface (remote control):

1 x IEEE

1 x USB

(ethernet only pass-through AutoWave)

Interfaces:

1 x trigger IN

1 x trigger OUT

1 x ± 10 analoge input

Cooling: Temperature- controlled air cooling

Power Mains: 120 VAC ± 10 % / L, N, PE

Fusage 120 V: 10 AT

Power mains frequency: 50 ... 60 Hz

Housing / Compartment: 19" / 6HU

Dimension: 289 x 535 x 500 mm

Weight: 37 kg

Operating temperature: 10 ... 40 °C

Humidity: 10 ... 90%, non-condensing

Pressure: 860 mbar ... 1060 mbar

Datasheet