Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Measurement Parameter: Main parameter: L/C/R/Z; secondary parameter: X/D/Q/θ/ESR
Equivalent mode: Series, parallel
Mode of range: Manual, automatic
Measurement speed: Fast（4 times/s）, medium（2 times /s）, slow（1 times /s）
Configuration of the test terminal: 3-terminal, 5-terminal
Correction function: Short circuit, open circuit
Communication interface: Mini-USB（virtual serial port）
Frequency of test signal: 100Hz, 120Hz, 1kHz, 10kHz, 40kHz, 100kHz
Level of test signal: 0.6Vrms, 0.3Vrms, 0.1Vrms
Output impedance: 100Ω
Highest accuracy (see accuracy indicators for details):0.2%
Electrolysis and capacitance mode: Yes
DCR mode: Yes
Internal bias: 0-500mV adjustable, 1mV stepping
Scope of measurement:
L:0-2000H
C：0-20mF
R：0-20MΩ
Correction function: Open circuit correction
Screening function: The limit range can be set to 1%-50%, which is fixed at 1%,5%,10%,20%
Deviation measurement: The percentage of deviation between the nominal value of the component and the setting and display
Other: Adjust backlight brightness, Device USB, automatic shutdown time can be set
ACCESSORIES STANDARD
1,Mini-USB data Wires;
2, power adapter;
3, short circuit chip;
4, red&black rubber plug;
5,large capacity lithium battery
Optional Accessories: Kelvin test clip; SMD test clamp
