Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Power Supply: DC6V alkaline dry battery (1.5V AAA×4)
Display Mode: 4-digit LCD display, backlight function, suitable for dim place
LCD Size: 47mm×28.5mm
Measurement Method: Non contact U-shaped CT
Transmission Mode: 433MHz wireless transmission, transmission distance about 100m
Clamp Jaw Size: Φ68mm
Sampling Rate: 2 times/second
Measurement Range: 0.00A~9999A(50/60Hz automatic)
Solution: 0.01A
Shift Gear: 0.00A~9999A Fully automatic shift gear
Test Accuracy: ±2%rdg±5dgt(The wire is in the center position near the bottom of the U-shaped clamp jaw)
Position Error: The measured conductor should be placed as close as possible to the center of the bottom of the U-shaped clamp jaw, not close to the top of the U-shaped clamp jaw. The testing error at the top of the U-shaped clamp jaw should increase by about twice or more.
Memory: 99 groups, in storage process “MEM” symbol display, “FULL” symbol flicker indicate storage full
Line Voltage: Testing below 110kV requires insulating rod (testing below 500kV can be customized).
Data Hold: Press HOLD key to hold data in test mode, “HOLD" symbol display, press HOLD key again to cancel this function.
Data Access: "MR" symbol display, can look up all storage data
Overflow Display: Exceed measure range overflow function:"OL A" symbol display
No Signal Indication: When the receiver has not received transmit signal, dynamic display "no- -"symbol
Automatic Shutdown: After 15 minutes power on, the meter shuts down automatically without any operation to reduce battery consumption
Battery Voltage: When battery voltage is lower than 4.8V±0.2V,low battery voltage symbol display and remind to replace battery.
Meter Size: Meter: 107mm×252mm×31mm; Receiver: 78mm×165mm×42mm
Weight: Meter: about 235g (include battery), Receiver: about 280g(include battery), Total weight: about 4.23kg(include insulating rod and battery)
Telescoping Insulating Rod Size: About 4300mm
Interference: Avoid 315MHz, 433MHz same frequency signal interference
Insulation Strength: AC 220kV/rms (The telescopic insulating rod is completely pulled apart, between the two ends)
Working Temperature & Humidity: -10℃~40℃; below 80%RH
Storage Temperature & Humidity: -10℃~60℃; below 70%RH






