Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
- Conductivity
Range:
... to 2.000 µS/cm ; ... to 20.00 µS/cm ;
... to 200.0 µS/cm ; ... to 2000 µS/cm ;
... to 20.00 mS/cm ; ... to 200.0 mS/cm ;
... to 1000 mS/cm
Resolution:
0.001 µS/cm ; 0.01 µS/cm ;
0.1 µS/cm ; 1 µS/cm ;
0.01 mS/cm ; 0.1 mS/cm ;
1 mS/cm
Accuracy: ±1 % of full scale reading (±2 % >500 mS/cm)
- Temperature
Range: -10.0 to 125.0 ºC / 14.0 to 257.0 ºF
Resolution: 0.1 ºC / 0.1 ºF
Accuracy: ±0.5 ºC / ±1.0 ºF
Sensor: Pt100 / Pt1000 (jumper selectable); 2 or 3 wire
Compensation: Auto/manual (normalized at 25 ºC)
- Set Point And Controller Functions
Set Point 1 (SP1)/ Set Point 2 (SP2):
... to 2.000 µS/cm or ... to 20.00 µS/cm or
... to 200.0 µS/cm or ... to 2000 µS/cm or
... to 20.00 mS/cm or ... to 200.0 mS/cm or
... to 1000 mS/cm
Switching Conductivity Hysteresis: 0 to 10 % of full scale
Function (Switchable): P/PI control (pulse length/pulse frequency/proportional integral); limit control; off
Adjustable Period With Pulse Length Controller: 0.5 to 20 sec
Adjustable Period With Pulse Frequency Controller: 60 to 120 pulse/min
Integral Action Time (IAT): 0 to 999.9 min
Pickup/Dropout Delay: 0 to 2000 sec
Wash Cycle: 0.1 to 200.0 hr
Wash Duration: 1 to 2000 sec
Contact Outputs: 1 SPDT, 3 SPST relays
Switching Voltage/ Current/Power:
1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
- Alarm Functions
Function (Switchable): Steady or fleet (pulse)
Pickup Delay: 0 to 2000 sec
Switching Voltage/Current/Power:
1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
- Electrical Data And Connections
Transmitter Function: Two 0/4 to 20 mA scalable outputs for pH/ORP and temperature, galvanically isolated
CU 22 Function: 22 mA current output
Isolated Output Voltage: 12 V ±0.5 V (max. 50 mA)
Hold Function Switch: To freeze output current and deactivate control relays
Load: Max. 600 Ohm
Conductivity Input: 2-cell/4-cell terminal
Connection Terminal: 5-pin, 8-pin, 9-pin & 13-pin terminal, detachable blocks
- Display:
LCD: UV coat, backlit 14 segments display with symbols for status information
Backlight: On/off selectable with four levels of brightness control
Power Supply
Input: 80 to 250 VAC/DC ; 50/60 Hz ; 10 VA
Main Fuse: 315 mA, anti-surge, S504 Bussmann
Pollution Degree: 2
Operating Temperature Range: 0 to 40 ºC
Max. Relative Humidity: 80 % up to 31 ºC decreasing linearly to 50 % at 40 ºC
- Dimensions (WxHxD): 144 x 144 x 110 mm
Weight: 745 g (unit) / 1100 g g (packed)
Ingress Protection: IP66 (NEMA 4X)
Include: terminal blocks, cable glands, gasket, etc
