Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Indicator: 0.3 ~ 1.5 mg/m3
Measuring Range: 0.3 ~ 1.5 mg/m3
Sampling Rate: 1000mL/min (60000mL)
Sampling Time: 60 minute
Colour Change: White → Dark green
Reaction Principle: Oil + I2O5 + H2S2O7 → I2
Coefficient of Variation: 15% (for 0.3 to 0.5 mg/m3) , 10% (for 0.5 to 1.5 mg/m3)
Nr. of tests: 10
| Measuring Range | 0.3 to 1.5 mg/m3 |
| Sampling Rate | 1000mL/min (60000mL) |
| Correction Factor | 1 |
| Sampling Time | 60 minutes |
| Colour Change | White → Dark green |
| Reaction Principle | Oil + I2O5 + H2S2O7 → I2 |
| Coefficient of Variation | 15% (for 0.3 to 0.5 mg/m3) , 10% (for 0.5 to 1.5 mg/m3) |
| Shelf Life | 2 Years |
| Corrections for temperature | Unnecessary for 0 to 40℃ |
| Corrections for humidity | Unnecessary for R.H.0 to 90% |
| Store the tubes at cool and dark place. | |
| Calibration gas generation | Diffusion tube method |
Measurement procedure:
 |
1.Install a reducer pressure with gauge and flow metre to a cylinder, compressor or air line and adjust the flow metre the required setting. | |
| 2.Break tips off a fresh detector tube in the tube tip breaker and insert a tube into a tube holder. |
 |
|
 |
3.Attach the rubber tube holder to the flow metre outlet. Make certain the tube arrow on the tube pointing in a down direction. |
|
| 4.Turn on the cylinder or compressor and confirm the flow metre according to each Airtec tube specifications. |
 |
|
 |
5.Time the flow rate with a stopwatch. | |
| 6.As soon as sampling time has elapsed turn off the cylinder or compressor, and remove the tube from the tube holder and then read the colour change layer immediately. |
 |
