Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Type of measure: RMS AC and DC
Installation form: DIN rail mounting
Mounting position: arbitrarily, vertically or horizontally
Input
Number of current and voltage input: 1
Current and voltage probes supported:
Rogowski probes; Current transformer with secondary 1A/5A
Current and voltage transformer with secondary ±10 Vpk or ±1 Vpk
Current transformer with secondary 100 mAAC/DC; Hall effect sensor ±15 VDC (incl. power supply)
Number of Temperature input: 1
Temperature probes supported: PT100 2-3 wire; NTC (10 kΩ / 100 Ω)
Available measurement
Irms; IDC; IAC; Irms max; Irms min; Irms average; IDC max; IDC min; IDC average; IAC max; IAC min; IAC average; Ah auf Irms
Ah auf IDC; Ah auf IAC; Frequency; Crest Factor; Temperature; Resistance
THD; Ipeak; harmonic analysis up to 63rd; Temperature of the device
Power supply: 10...30 VDC
Absorption: max. 2.5 VA
Output
Digital output: RS485 Modbus/RTU
Analog output: 0...10 V or 4...20 mA (fully configurable via software)
Relay output: Free contact (alarm) 50 mA, 30 VDC (Optomos contact)
Accuracy
Accuracy channel 1/5 A
Crest Factor: 4 (@ 5 A)
Range 50 mA < I < 250 mA: Maximum Error 1%
Range 250 mA < I < 5 A: Maximum Error 0.5%
Accuracy channel 20/100 mA
Crest Factor: 4 (@ 100 mA)
Range 1 mA < I < 5 mA: Maximum Error 1%
Range 5 mA < I < 100 mA: Maximum Error 0.5%
Accuracy channel ± 1 Vpk
Range 10 mV < V < 50 mV: Maximum Error 1%
Range 50 mV < I < 1 V: Maximum Error 0.5%
Accuracy channel ± 10 Vpk
Range 100 mV < V < 500 mV: Maximum Error 1%
Range 500 mV < I < 10 V: Maximum Error 0.5%
Accuracy Temperature PT100
Range: -200 °C ... 600 °C
Accuracy Temperature NTC
Range 200 Ω ... 20 kΩ: ± 1.2 °C on reading
Range 20 kΩ ... 300 kΩ: ± 1.6 °C on reading
Accuracy Analog Output: < 0.1 % F.S.
Sampling rate 6400 Hz @ 50 Hz
Housing protection: IP IP20
Weight: 55 g
Connections: Plug-in terminals 3.5 mm, 2x10 Pol
DIP switch: 2 Pol
Programming: Via DIP switch, Modbus RTU and software
