GYS POWDERDUCTION 39LG Water Cooled Induction Heating Machine (1ph; 230V; 3700W; 20-60kHz)

The POWERDUCTION 39LG provides instant and powerful heating to release, or simply heat, steel or aluminium. Equipped with a liquid-cooling unit, this device can also heat metallic parts continously for several minutes without interruption.

The ideal tool for mechanical and maintenance interventions:

• Essential for releasing the steering linkage (wheel alignment).

• Removes glow plugs, seized-up wipers and spare wheel compartments.

• Releases seized up bolts and steering ball joints without damaging the bellows.

• Releases shaft drives seized up in the hub.

• Removes automotive or HGV exhaust lines.

Also suitable for car bodywork:

• Removes glued-on, steel or aluminium parts.

• Straightens out bent chassis (if not high-tensile steel).

FEATURES

• High heating performance: 3,700 W of power that can be easily adjusted in 250 W increments. Directly heats up the heart of the metallic part at a depth of 6 mm. This device is capable of heating steel until it is red hot (around 800°C):

• Secure and time saving: Immediate, flameless heating in a specific area, allows work to be carried out close to cables, pipes or any other heat-sensitive part without having to be dismantled.

• Comfortable to use: Its three metre long inductor cable enables working at height.

• Reinforced protections for using the equipment with power sources as well as protections against permanent overvoltage up to 400 V (factory tested).

• PFC feature (Power Factor Correction): regulates and uses the power supply more efficiently

Specifications:

Power supply: 230 V - 1 ph, 50/60 Hz

Current: 16 A

Power: 3700W

Heating frequency: 20-60 kHz

Coolant: Water (7 L)

Duty cycle (environment temp. 40°C) @ 100%: 15 minutes

Protection class: IP 21

Dimensions (L x w x h): 53 x 70 x 37 cm

Weight: 50 kg

Standard: IEC 60335-1

Power supply cable: 3 m

Included accessories: A complete inductor 20° C20/B1 - 056862