Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Weight: 44 kg (97 lbs)
Humidity: 10-70% non-condensing
Model Family: 3000CS
Power Supply: 100-240 VAC, 50-60 Hz, 100 W typical
Analog Output: 22mA alarm, 500 ohm max load, not for use with externally powered circuit
EnclosureType: Full
Relay Contacts: Mechanical rated at 250 VAC, 3 Amps (Relay 1 NC, Relay 2 to 4 NO), 4-SPDT Type Reed 250 VAC or DC, 0.5 Amps (Relay 5 to 8)
Sample Pressure: 0.3-7 bar (5-100 psig)
Sample Flow rate: 25-50 mL/min
Ratings/Approvals: CE / cULus
Built-in sequencer: No
Dimensions (HxWxD): 927x508x305 mm (36.5"x20.9"x12")
Operator Interface: Color touchscreen Simultaneous display of ion concentrations and analyzer status
Process Connection: Sample Inlet: 1/4" or 6 mm OD tube SS compressin fitting Drain Hose: 19x25.4 mm (3/4 x 1") 2 m (6 ft) length included
Sample Temperature: 10-45°C (50-113°F)
Analog Output Scaling: Linear, bi-linear, logarithmic (1,2,3,4 decades), auto ranging
Measurement Parameter: Chloride and sulfate
Analog Output Accuracy: ±0.05 mA
Measurement Cycle Time: 45 min typical, programmable between 15 minutes and 1 hour
Grab Sample Measurement: Included 100 mL capacity
Sulfate Measurement Range: 0-300 ppb
Chloride Measurement Range: 0-300 ppb
Sulfate Limit of Detection: 1 ppb
Chloride Limit of Detection: 0.5 ppb
Sulfate Measurement Accuracy: ±10% of reading or ±1 ppb whichever is greater
Ambient Operating Temperature: 10-35°C (50-95°F)
Chloride Measurement Accuracy: ±5% of reading or ± 0.5 ppb whichever is greater
