Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

Control units: single chips and push buttons
Glow-wire Loop
Diameter: 4mm ± 0.04mm
Material:
Ni/Cr(80/20)
Sharp: 500W standardized loop, horizontally placed
Thermocouple
Diameter: Φ1mm K type
Material: K type (The insulating sleeve heat resist to 1250 ℃)
Glow-Wire Heating Temperature
500 ℃ ~1000℃
(presettable)
temperature fluctuation < 3 ℃
Temperature Monitor: A thermocouple is placed at a distance
of 100 mm between the glow wire device and the back panel of the cabinet, and
an external temperature display instrument is provided
Flame Height: Measuring with a steel ruler
Thermal radiation baffle: Automatic masking
Pressure on test specimen: 0.95N±0.1N
Maximum penetration depth: 7mm ± 0.5mm (adjustable)
Specimen moving speed: 10mm /s ~25mm /s
Glow Time: 30s±0.1s(1s ~ 999.9s adjustable)
Burning time: 0-999.9s±0.1s (auto record)
Flame Chilling time: 0-999.9s±0.1s (auto record)
Standard Silver Foil
Thickness:0.06mm
Purity:≥99.8%
Area: 2mm2
Ignition mat: White pine board with thickness of 10mm is
covered with a layer of 12~30g/m2 wrapping tissue, 200±5mm below the sample.
Chamber volume: ≥ 0.5m3 , matte black background,
illuminance ≤ 20Lux, exhaust hole: Φ70mm (Power on automatic work)
Dimension: 1220mm * 600mm *1250mm (W*D*H), exhaust device:
Φ100mm
Power: 220V/50Hz, 1KVA
Glow wire testing is an electrical safety test designed to evaluate the flame resistant properties of plastic materials used in electrical devices. Its purpose is to protect against the risk of fire from overheated or electrically energised parts which may cause the plastic material to ignite. This may occur in normal use, under reasonable abnormal use, malfunction or failure of the product. The glow wire simulates an over-heated part which then comes into contact with plastic materials.
The glow wire tester is designed according to IEC60695-2-10 t0 IEC60695-2-13, UL746A, IEC829, DIN695 and VDE0471. The specific material and sharp heating wire is heated to specific temperature (550 ℃~960 ℃) for 1 min by max current, then vertical burns the EUT with certain pressure (0.95N) for 30s, then check if the test specimen and bedding material are burning, and count the burning time to judge the dangerousness of the specimen. Generally it is applied to test flammability, GWIT and GWFI of lighting lamps, electronic products and household appliances The equipment is applicable to flame resistance test of all levels of QC departments and corresponding enterprises.
This equipment is controlled by single chips and push buttons, the shell is made of coating metal sheet, the test apparatus is built-in air exhaust, and the front panel is transparent for easy observation of the experimental process.