Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
FREQUENCY
Frequency range: From 9 kHz to 3 GHz
Resolution: 1 Hz
Frequency reference
- Accuracy: ± (period since last adjustment X aging rate) + stability over temperature + supply voltage stability
- Aging rate: ±1 ppm max.
- Frequency stability: ±0.025 ppm
- Over temperature supply voltage stability: ±0.02 ppm
Frequency readout accuracy
- Start, stop, center marker: ± (marker frequency indication X frequency reference accuracy + 10% RBW + frequency resolution)
- Trace points: Max 601 points, min 6 points
Marker frequency counter resolution: 1 Hz, 10 Hz, 100 Hz, 1 kHz
- Accuracy: ± (marker frequency indication X frequency reference accuracy + counter resolution)
Frequency span: 0 Hz (zero span), 100 Hz to 3 GHz
- Resolution: 1 Hz
- Accuracy: ± frequency resolution
Phase noise
- Offset from carrier: Fc = 1GHz; RBW = 1 kHz, VBW = 10 Hz; Average ≥ 40
10 kHz < -88 dBc/Hz typ.
100 kHz < -95 dBc/Hz typ.
1 MHz < -113 dBc/Hz typ.
Resolution bandwidth (RBW) filter: From 1 Hz to 1 MHz in 1-3-10 sequence
- Accuracy: ±8 % (RBW = 1 MHz)
±5 % (RBW < 1 MHz)
- Shape factor: < 4.5:1
Video bandwidth (VBW) filter bandwidth: From 1 Hz to 1 MHz in 1-3-10 sequence (-3 dB bandwidth)
AMPLITUDE
Amplitude measurement range
- 100 kHz to 1 MHz: Displayed average noise level (DANL) to 18 dBm
- 1 MHz to 10 MHz: DANL to 21 dBm
- 10 MHz to 3 GHz: DANL to 30 dBm
Input attenuator range: From 0 to 50 dB, in 1 dB step (auto or manual setup)
Maximum safe input level
- Average total power: ≤ +33 dBm (input attenuator ≥ 10 dB)
- DC voltage: ± 50 V
1 dB gain compression
- Total power at 1st mixer > 0 dBm (typ., Fc ≥ 50 MHz; preamp. off)
- Total power at the preamp > -22 dBm (typ.; Fc ≥ 50 MHz; preamp. on)
- Preamp: Mixer power level (dBm) = input power (dBm) - attenuation (dB)
Displayed average noise level (DANL)
Preamp off: 0 dB attenuation; RF input is terminated with a 50 Ω load.
RBW 10 Hz; VBW 10 Hz; span 500 Hz; reference level = -60 dBm; trace average ≥ 40
- 9 kHz to 100 kHz < -93 dBm
- 100 kHz to 1 MHz < -90 dBm - 3 x (f/100 kHz) dB nominal
- 1 MHz to 2.7 GHz < -122 dBm
- 2.7 GHz to 3 GHz < -116 dBm
Preamp On: 0 dB attenuation; RF input is terminated with a 50 Ω load;
RBW 10 Hz; VBW 10 Hz; span 500 Hz; reference level = -60 dBm; trace average ≥ 40
- 100 kHz to 1 MHz < -108 dBm - 3 x (f/100 kHz) dB nominal
- 1 MHz to 10 MHz < -142 dBm
- 10 MHz to 3 GHz < -142 dBm + 3 x (f/1 GHz) dB
SWEEP
Range: 307 µs to 1000 s (Span > 0 Hz)
50 µs to 1000 s (Span = 0 Hz; Min resolution = 10 µs)
Sweep mode: Continuous; Single
Trigger mode: Free run; Video; External
Trigger slope: Positive or negative edge
RF PREAMPLIFIER
Frequency range: 1 MHz to 3 GHz
Gain: 18 dB (nominal, installed as standard)
Internal data storage 16 MB nominal
Screen: 8” color LCD
Warm-Up time: < 30 minutes
Temperature range: +5 to +45 ºC (operating), -20 to +70ºC (storage)
Weight: Less than 4.1 kg
Dimensions: 350 (W) x 210 (H) x 100 (D) mm approx
BATTERY PACK (OPTIONAL): 6 cells, Li-Ion rechargeable (with UN38.3 certification) DC 10.8 V, 5200 mAh / 56 Wh
TRACKING GENERATOR: N-type female connector, 50 Ω nominal
Frequency range: From 100 kHz to 3 GHz
Output power: -50 dBm to 0 dBm in 0.5 dB steps
Absolute accuracy: ±0.5 dB (@ 160 MHz; -10 dBm; Source attenuation 10 dB; 20 to 30ºC)
Output flatness: Referenced to 160 MHz; -10 dBm
- 100 kHz to 2 GHz ±1.5 dB
- 2 GHz to 3 GHz ±2 dB
Output level switching: ±0.8 dB (referenced to -10 dBm)
Uncertainty Harmonics: < -30 dBc (typ., output level = -10 dBm)
Reverse power: +30 dBm max.
Output VSWR: < 1.6:1 (300 kHz to 3 GHz; Source attenuation ≥ 12 dB)
