Valhalla Scientific ALPHA 4314 Digital Igniter Tester (2Ω ~ 200MΩ)

General Specifications:

Display Type: 4 ½ digits LEDs (19999)

Overload Indication: O.L.

Conversion Rate: 3 readings per second

Terminal Configuration: 4-Wire Kelvin

Current Source Compl. Voltage: Clamped at 1.6V

Power: 4“D” Cell 1.2V recharg. NiMH Batteries 10000mAh

Battery Charger: 6VDC at 300mA nominal

Temperature

Temperature Coefficient: ±0.002% per °C(from 0°C~15°C and 35°C~50°C)

Operating Temp. Range: 0°C~50°C

Storage Temp. Range: -10°C~70°C

Physical Specifications

Width: 9.5”/24cm

Depth: 11”/27cm

Height: 3”/8cm

Weight: 3lbs/1.3kg net; 6lbs/3kg shipping

Accessories:

Battery Charger 115Vac to 6VDC @ 300mA

4 Heavy Duty rechargeable NiMH Batteries 1.2V 10000mAH.

Carrying Case for the meter with room for the battery charger and Lead Sets

Pelican 1500 Hard Carrying Case with Custom Foam for the meter, battery charger, up to 3 sets of leads and extra batteries.

Standard 19" equipment rack adaptor

Options:

This option provides parallel BCD data on p rear-panel 50-pin connector. All outputs are TTL comparable levels with a drive capability of 1 LS load.

Continuous Isolated AC Power

6-pin Mil-Spec circular connector (MS3112E10-6S) replaces the four-terminal banana jacks and the battery charger jack. Makes it physically impossible to simultaneously connect the AC/DC Charger while measuring with the test leads.

Datasheet

Manual