Warranty policy

During using if there is any problems or errors that users can contact directly with Company Service Center or Customer Care Unit of the company for assistance.

EMIN Viet Nam Joint Stock Company

Warranty Policy

During using if there is any problems or errors that users can contact directly with Company Service Center or Customer Care Unit of the company for assistance.

I- Warranty

*Warranty Period: This is the time that EMIN is responsible for receiving and solving the warranty for the products provided by EMIN, which was on the warranty card and stamp.

* Valid warranty card: Is the warranty card issued by EMIN and provided with the product that was stamped by EMIN.

The warranty card is issued by EMIN and attached with the product stamped by EMIN, the warranty form must be in specified form, not separated – not pieced, production code on the warranty card must be the same as the code of product that need warranty (no signs of being erased or repaired)

* Valid warranty stamp: This is a sticker that EMIN paste on each product, no patchwork or no repairing, peeling, re-pasting.

II-General policy

EMIN applies the warranty policy nationally incuding customers who purchase EMIN products at any EMIN branch/office.

Product warranty : Overcoming defects, technical breakdown which occurs due to manufacturer's fault.

III. What is covered?

- Products are guaranteed with free charge in warranty period from the date of delivery (The warranty period is shown on the warranty card and according to the manufacturer's regulations for all technical incidents).

- With EMIN warranty card and and stamp on the product.

- Products are renewed: Products must meet the above warranty conditions and defects caused by manufacturer production that EMIN cannot repair will be changed by a new one.

IV- What is not covered?

- The product has expired on the warranty card or the warranty card lost.

- Warranty seals are torn, broken, overpasted or information modified.

- Warranty card does not specify the serial number and date of purchase.

- The number on the machine can not be identified or wrong than the number is recorded on the warranty card.

- The product is damaged due to mechanical deformation, damage due to human causes such as dropping, broking, impacting, scratching, distortion, moisture, leaking, flowing or fire, natural disaster, electric shock, and explosion.

- The product with signs of damage caused by rodents or insects.

- The product is used improperly, using wrong voltage regulation.

- Unauthorized dismantling, repairing by individuals or technicians who are not authorized before warranty claiming.

V-Service after warranty

Devices and products purchased from has expired or under non-guaranteed conditions will be repaired by EMIN Service Center at preferential prices or supported for repairing at EMIN.

VI- Location of warranty

SERVICE CENTER

Phone: (024) 353.812 .69 - Fax: (024) 351.90 3.60 - Email: hn@emin.vn

Website: http://www.emin.vn

Support time: 8h00 - 17h30 except Saturday, Sunday, holidays.

GENERAL DIRECTOR

Related News

11/14/2026 11:35:16

What Is Fiber Polarity and How Do You Choose an MPO Method?

Fiber polarity ensures the transmit path connects to the corresponding receive path. For MPO-based duplex channels, the selected method must remain consistent across trunks, cassettes, adapters, and patch cords.

11/14/2026 10:28:19

The scent of new wood in a newly handed-over apartment: How to measure and address formaldehyde (HCHO) levels before moving in

Many people refer to the pungent, acrid odor that emerges when opening a new cabinet as the "smell of new wood," assuming it will simply dissipate after a few days. In reality, however, what is being released could well be formaldehyde—a substance originating from the adhesives used in the pressed-wood panels—and our sense of smell is not a reliable enough gauge to determine the concentration levels present

11/13/2026 17:23:39

Guide to Selecting a TCLP Toxicity Characteristic Leaching Procedure Shaker Configuration in Compliance with QCVN 07:2025/BNNMT and TCVN 9239:2012

Regulation QCVN 07:2025/BNNMT (replacing QCVN 07:2009/BTNMT and QCVN 50:2013/BTNMT) specifies hazardous waste and sludge thresholds based on leachate concentrations. To ensure that analytical results for heavy metals and organic compounds are accepted during ISO/IEC 17025 or VIMCERTS assessments, laboratories must comply with the Toxicity Characteristic Leaching Procedure (TCLP) specified in TCVN 9239:2012, which is equivalent to US EPA Method 1311

11/13/2026 16:11:22

Checking the Temperature of Paint and Coating Surfaces After Curing Using an Infrared Thermometer

An infrared thermometer allows surface temperature measurement without direct contact, making it suitable for products coming out of curing ovens or surfaces that are difficult to access. However, to ensure reliable results for production quality control, it is important to understand the measurement principle and the factors that affect measurements on painted and coated surfaces.

11/13/2026 15:07:40

Crowded Gyms and Yoga Studios: How to Manage Air Quality to Retain Members

Around 6 or 7 in the evening, the gym becomes packed; the music drowns out the sound of heavy breathing, and the air conditioning runs at full blast behind closed doors. At first glance, everything seems fine: the room is cool, the lights are bright, and the equipment is state-of-the-art. Yet, after just a few sessions, regular members begin to feel a heavy-headedness and find themselves running out of breath more quickly eventually, they simply stop renewing their memberships. No one complains about the personal trainers or the exercise machines. The very thing that makes them feel stifled and drives them away is something entirely invisible: the air inside the room