Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Voltage Test
+ Test voltage: 1, 2.5, 5, 10, 15kV
+ Voltage accuracy: ±（5%+10V）
+ Short-circuit current: 10mA
- Range: Resistance measurement range; Accuracy
+ 20MΩ/500V: 0.5～19.99MΩ; ±(5%+5digital)
+ 200MΩ/1000V: 5.0～199.9MΩ; ±(5%+5digital)
+ 2GΩ: 0.05～1.999GΩ; ±(5%+5digital)
+ 20GΩ: 0.5～19.99GΩ; ±(5%+5digital)
+ 200GΩ: 5.0～199.9GΩ; ±(10%+10digital)
+ 2000GΩ: 50～1999GΩ; Less than 1000GΩ ± (20% + 10 digital) (humidity ≤70%)
Calibration voltage of MΩ range is 0.5kV; Calibration voltage of GΩ range is 2.5kV
- Anti-electric field interference ability: 2mA(50Hz)
- Timekeeping and alarm function: maximum value of stopwatch is 19 minutes and 59 seconds. 20 minutes for a cycle. The stopwatch will tell the time at these time points: 15 seconds, 60 seconds and every 60 seconds. When telling time, resistance readings hold for 5 seconds. If the measured resistance is below the lower limit of range, the reading is invalid and the instrument will continuously sound to give an alarm
- Display: three and a half bits LCD digital meter (three), respectively show test voltage, test resistance, test time
- Power supply: 10×1.2Vbattery(2000mAh Ni-MH rechargeable battery),
Total DC12V power supply
AC: 220V (50/60Hz)
- Operating Conditions
+ Temperature：0～40℃
+ Relative humidity：20～90%
- Dimension: 315×240×155mm3
- Weight: 5kg
Accessories
- Host
- HV cable
- Connect Wire
- Resistor
- Power Cord
- Manual, Report, Certificate
