Laboratory & Research

High-speed cameras are devices that record movement occurring over very short periods of time, beyond the reach of the naked eye. Moments such as a droplet of liquid breaking, mechanical parts colliding, or a flame erupting in a combustion chamber all require this type of camera for accurate analysis.

Radiation is often misunderstood as a purely harmful agent, but in reality, it is a phenomenon that transmits essential energy for life and production. Understanding the energy spectrum helps us control risks and operate technologies more effectively in real-world environments.

In the laboratory, both biosafety cabinets and microbiological culture cabinets are associated with air control and sample manipulation requirements. Because they both appear in biological research environments, these two types of cabinets are often considered the same or interchangeable. In reality, they were developed for entirely different purposes.

Before the end of the year, EMIN completed the deployment of the Roche Diagnostics cobas 5800 automated PCR testing system for a central-level medical unit, serving molecular biology testing and epidemiological surveillance.

In electrical and electronics labs, testing power supplies is always a mandatory step to ensure stable operation of equipment before real-world use. However, connecting the power supply directly to a real load such as a motor or circuit carries a high risk. A sudden change in current or a small deviation during testing can cause overload or short circuits. Therefore, engineers often choose dummy loads to simulate real-world operating conditions more safely and accurately.

Pharmaceutical products specialized in electronics, food and medical equipment manufacturing increasingly tighten requirements on sterility and cross-contamination control. Airshower blocks meeting GMP (Good Manufacturing Practice) standards have become a must-have item in modern cleanroom systems.

How can a single temperature measurement determine the entire quality and safety of a batch of material? The Melting Point serves as the key to controlling material purity in every production process.

The NOVOTEST DPM LAB dew point meter is designed for technicians who need to monitor environmental conditions before coating application, paint spraying or surface acceptance.

For sample preparation, the ultimate goal is to obtain a perfect casting, that is, one that does not have any voids or gaps sticking to the surface of the sample. The presence of air bubbles, no matter how small, will seriously distort the results when we analyze the microstructure, measure hardness, or check for material defects. That is why the choice of casting method is a key technical decision that cannot be taken lightly.

In daily life, we often encounter many situations where we need to clean an item, be it a household item, work equipment or food. In addition to familiar cleaning methods, many people now choose ultrasonic cleaning tanks. So how is this method different from the traditional method?